Mist Eliminator – Oil Mist Separators

Mist Eliminator - Oil Mist Separators

Minimizes energy losses with very low differential pressure.
Positive seal ensures best sealing.
Filter change pressure difference 170 mbar.
Long service life.

MODELS AND TECHNICAL INFORMATION

MODEL Capacity Connection Size Drain Port Maximum
Working
Pressure		 Maximum
Working
Temperature		 Element Model Housing Dimensions (mm)
m3/min cfm Size bar 0C A B C D OE OE G H
ELM 150 4.25 150 DN50 G ½” 16 80 14 500 1003 209 459 203 103 305 330
ELM 300 8.5 300 DN50 G ½” 16 80 14 500 1105 209 559 203 103 407 435
ELM 600 17 600 DN50 G ½” 16 80 14 500 1461 209 916 203 103 762 790
ELM 800 22.7 800 DN80 G ½” 16 80 14 500 1655 279 1084 203 103 915 950
ELM 1200 34 1200 DN80 G ½” 16 80 14 600 1520 281 931 254 103 762 790
ELM 1600 45.3 1600 DN80 G ½” 16 80 14 600 1671 281 1086 254 103 915 950
ELM 2100 59.5 2100 DN100 G ½” 16 80 14 700 1575 335 953 300 129 762 790
ELM 2750 77.9 2752 DN100 G ½” 16 80 14 700 1726 335 1100 300 129 915 950
ELM 4200 119 4200 DN150 G ½” 16 80 14 800 1670 393 983 365 181 762 790
ELM 6000 170 6000 DN150 G ½” 16 80 14 800 1925 393 1258 365 181 950 1045
ELM 8000 226.7 8000 DN200 G ½” 16 80 14 850 2020 417 1277 386 233 1016 1045
ELM 10000 283.3 10000 DN250 G ½” 16 80 14 1000 2118 417 1307 407 337 1016 1045
ELM 12000 340 12752 DN300 G ½” 16 80 14 1000 2688 497 1847 437 337 1524 1550

General Information

TASKS

Possible filter blockage or damage of the compressor oil seperator going to the system and prevent the risk of the reliability of the system increases. Extremely easy setup and operation, this product also need to hear the service for a long time.

ADVANTAGES

  • Very low pressure loss
  • High efficiency separation oil mist
  • Easy cleaning
  • Standard automatic float drain
  • 4 Minimum Maximum Operating temperature of 80 OC to OC
  • 0,01 micron particle retention and oil-water mixture included in the aerosol holding ability is 0,01 ppm.
  • Extended surface area and allow a more effective separation takes place at low speed, splitting.
  • Elements of static electricity that is grounded to the problems of the body are minimized.

CORRECTION FACTOR

To calculate the maximum flow rate coefficient multiply catalog working pressure corresponding to the flow rate.

MIST ELIMINATOR ELEMENTS

  • Minimizes energy losses with very low differential pressure
  • The positive gasket seal provides the best way to
  • Change the filter 170 mbar pressure difference
  • Long service life
I want more information
Other product