DryAir DBP Series (Heated Desiccant)

MODELS AND TECHNICAL INFORMATION

Model Capacity* Connection Size Voltage** Maximum
working
Pressure
Maximum
ambient
Temperature
Maximum
Inlet
Temperature
Included Filter Dimensions (mm) Weight
m3/min cfm bar 0C 0C and Type Length Width Height Kg
DBP 850 14.2 500 G 2” 400V/3/50Hz 10 40 45 GKO 851 MX+MY+MP(H) 1296 1180 2299 C/F
DBP 1000 16.7 589 G 2” 400V/3/50Hz 10 40 45 GKO 1210 MX+MY+MP(H) 1200 1310 2415 C/F
DBP 1250 20.8 736 DN80 400V/3/50Hz 10 40 45 GKO 1820 MX+MY+MP(H) 1610 1270 2468 C/F
DBP 1500 25 883 DN80 400V/3/50Hz 10 40 45 GKO 1820 MX+MY+MP(H) 1610 1270 2563 C/F
DBP 1800 30 1059 DN80 400V/3/50Hz 10 40 45 GKO 1820 MX+MY+MP(H) 1563 1515 2479 C/F
DBP 2200 36.7 1295 DN80 400V/3/50Hz 10 40 45 GKO 2220 MX+MY+MP(H) 1563 1455 2789 C/F
DBP 2700 45 1589 DN80 400V/3/50Hz 10 40 45 GKO 2700 MX+MY+MP(H) 1615 1514 2836 C/F
DBP 3200 53.3 1883 DN100 400V/3/50Hz 10 40 45 F 3200 MX+MY+MP(H) 1710 1660 3054 C/F
DBP 3600 60 2119 DN100 400V/3/50Hz 10 40 45 F 4300 MX+MY+MP(H) 1710 1660 3268 C/F
DBP 4400 73.3 2590 DN100 400V/3/50Hz 10 40 45 F 4300 MX+MY+MP(H) 1975 2492 2910 C/F
DBP 5000 83.3 2943 DN125 400V/3/50Hz 10 40 45 F 6500 MX+MY+MP(H) 2045 2560 3382 C/F
DBP 6300 105 3708 DN150 400V/3/50Hz 10 40 45 F 6500 MX+MY+MP(H) 2090 2963 3328 C/F
DBP 7200 120 4238 DN150 400V/3/50Hz 10 40 45 F 8500 MX+MY+MP(H) 2020 3363 3047 C/F
DBP 8800 146.7 5179 DN150 400V/3/50Hz 10 40 45 F 8500 MX+MY+MP(H) 2020 3363 3341 C/F
DBP 10800 180 6357 DN200 400V/3/50Hz 10 40 45 F 11000 MX+MY+MP(H) 2492 3481 3765 C/F

General Information

The DryAir DBP series dryer provides a constant dew point of -40 ° C. DBP dryers are designed to operate under normal conditions of 7 bar inlet pressure, 35 ° C inlet temperature and 100% inlet air relative humidity.

The DBP series maintains its functionality up to the operating pressure of up to 12 bar (g).

  • Monitoring and control of dew point
  • Computer controlled structure
  • Show operating status, alarm and pressure information
  • Remote start and stop function
  • Low pressure alarm system with minimum pressure valve
  • High pressure switch and alarms
  • Working as an integrated warm or dry dryer offered with a unit
  • Centrifugal blower and high efficiency heater removes valuable dry air usage needed to regenerate the desiccant material.
  • The fully automatic drying system uses the blower to draw the ambient air and to pass it through the heater. This hot air flow is the opposite of the flow of air to be dried.
  • The hot air above 200 ° C completely evaporates the moisture in the dryer bed through the drying agent.
  • The advanced control system monitors the dew point and adjusts the heating / regeneration cycles accordingly. This saves energy in serious dimensions.
  • The heating circuit is completely isolated to provide maximum heating efficiency.